This product was formulated to bond the glass, SS, ABS, and PC substrates used in these devices, as well as to solve the challenges associated with needle orientation, material overflow, and long flow-in dispense and cure times of other technologies. This low extractables material passes ISO 10993 cytotoxicity testing and meets essential biocompatibility standards for medical device applications. It is intended to help manufacturers increase productivity, reduce processing times, and exceed critical pull force and quality requirements.
1045-M is one-part, solvent-free, and 100% solids for an eco-friendly alternative to solvent- or epoxy-based adhesives. In addition, the product’s low 475 centipoise viscosity flows into components in 10 seconds versus the current 30+ second standard. The material also cures tack-free with UV/broad spectrum light and is LED-curable at 365nm in five seconds for faster, environmentally-friendly processing. This low-shrinkage adhesive exhibits a glass-like cure surface, resists yellowing, and withstands autoclave cleaning and Gamma and ETO sterilization methods.
1045-M needle bonding adhesive is in full compliance with RoHS directives 2015/863/EU.
