V Band Clamps pull together and connect two circular flanges, for a much lighter and easier to fit joint. They can be stripped down for maintenance and require less installation space compared to traditional bolted flanges. Using a V clamped joint allows mating pipes to be rotated to the correct location before the V clamp is secured. The clamps are designed to function reliably and safely under conditions involving stress, vibration and corrosion. The clamps form the required seal around dedicated Flange Sets also provided by JET PRESS, which are simply welded to the mating pipe ends prior to final assembly.
Hose Band Connection Clamps can be used in hose sealing and retaining applications, most commonly for clamping flexible hoses to solid pipes, strapping together groups of pipes or cables, or replacing worm drive clips and clamps. The T-Bolt design offers strength and reduction in component damage often associated with worm drive clips, and can operate under conditions of stress including pressure applications, vibration and corrosion.
Slip Joint Assemblies are designed for connection problems in high temperature gas exhaust systems. They can operate in gas temperatures of up to 750°C and are normally used in lower pressure applications. The Slip Joint is an easy to fit all-in-one assembly that does not require welded flanges or additional gaskets. The joint assembly is quickly and easily achieved by slipping the seal and slip joint over the unflared pipe and pushed against the pre-formed flare of the mating pipe. The joint is finally achieved by placing the V Band Clamp over the assembly and torqueing to the required pressure by means of the clamping bolt and nut assembly.
Teconnex V Band Clamps, Hose Band Connection Clamps and Slip Joint Assemblies are available in a wide range of sizes and finishes for bespoke designs. Full details of Teconnex Hose Band Clamps are available on the JET PRESS website.
