01 July 2010
Sign up to our newsletterWant more news like this? Sign up to our newsletter.

Blind riveting with less effort

Many years of experience have led to the introduction of an innovative lever riveter for bllind rivet nuts by Tecfast Verbindungssysteme.

The Tectool TF 608 lever riveter lets thet user cut costs and start riveting straight away without any adjustments. And what's more the new design gets the job done with the minimum of effort and without the risk of breaking the mandrel in the tool.

Many lever riveters can only be operated with a great deal of force so the process of fitting several blind rivet nuts one after the other then becomes a tiring exercise. The TF 608 reduces the force required to set blind rivet nuts by 30%.

Having to set the right level of pull is frequently a hindrance to getting the job started quickly. If you are working with unfamiliar materials, the adjustment is often forgotten or incorrectly set. With the TF 608 the operator no longer has to worry about it. Laborious adjustment of the length of pull is no longer required. The new lever riveter for blind rivet nuts can be used straight out of the box, saving you time and effort.

The riveter is designed for use with M5–M10 blind rivet nuts and M5–M8 blind rivet bolts and is supplied in a plastic case that also includes nosepieces for M5–M8 blind rivet nuts. A nosepiece for M10 blind rivet nuts and nosepieces for M5–M8 blind rivet bolts are available as an option.

Paul Gay


Do you have any comments about this article?


Your comments/feedback may be edited prior to publishing. Not all entries will be published.
Please view our Terms and Conditions before leaving a comment.

Similar Articles